home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TPUG - Toronto PET Users Group
/
TPUG Users Group CD
/
TPUG Users Group CD.iso
/
CRS
/
crs36.d81
/
xlink.arc
/
XLINK.DOC
< prev
Wrap
Text File
|
2009-10-10
|
15KB
|
281 lines
├╥╧╙╙ ╠╔╬╦ 2.1
FOR ╔┬═-╨├ <> ├-128 FILE TRANSFERS
<C> BY ═. ╟ARAMSZEGHY 86-04-15
(REV 1: 86-06-01)
67 ├ALLENDER ╙TREET
╘ORONTO ╧NTARIO
├┴╬┴─┴ ═6╥ 2╚2
****╨╠┼┴╙┼ ╬╧╘┼****
╨ERMISSION IS HEREBY GRANTED TO REPRODUCE THIS PROGRAM
AND DOCUMENTATION FILE FOR PERSONAL USE ONLY. ╘HIS
MATERIAL IS ╬╧╘ ╞╧╥ ╙┴╠┼ UNDER ANY CIRCUMSTANCES!!
╔ ENCOURAGE COPYING AND DISTRIBUTION, SUBJECT TO
THE ABOVE RESTRICTIONS. ╨LEASE ADDRESS ALL COMMENTS,
SUGGESTIONS, ETC TO ME AT THE ABOVE ADDRESS OR
AT THE ╘╨╒╟ ┬┬╙ (416) 273-6300 [╨UNTERNET ╬ODE 2]
├╥╧╙╙ ╠╔╬╦ IS A SHORT ┬┴╙╔├ 7 PROGRAM FOR USE ON THE ├-128 WITH A
1571 DRIVE. ╔T ALLOWS YOU TO READ A FILE INTO A 45 K ╥┴═ BUFFER FROM ANY ONE
OF THE FOLLOWING SEVEN DISK FORMATS:
╙┼╤ - ┴╙├╔╔
╙┼╤ - WITH ╨┼╘╙├╔╔ <> ┴╙├╔╔ CONVERSION
╨╥╟ - ┴╙├╔╔
╨╥╟ - WITH SCREEN CODE <> ┴╙├╔╔ CONVERSION
├-128 ├╨/═ SINGLE SIDED
├-128 ├╨/═ DOUBLE SIDED
╔┬═ ╨├-─╧╙ DOUBLE SIDED, 9 SECTORS/TRACK
╘HE BUFFER CAN THEN BE WRITTEN TO ANOTHER DISK IN ANY OF THE SAME LIST OF
FORMATS OR TO A PRINTER. (╔T SHOULD BE NOTED THAT THE ╔┬═ ╨├-─╧╙ DOUBLE
SIDED FORMAT IS ╬╧╘ THE SAME AS THE "╔┬═-─╙" WHICH IS SUPPORTED BY ├-128 ├╨/═
MODE. ╘HE LATTER FORMAT IS USED BY ├╨/═-86 WHICH IS THE 16 BIT VERSION OF
├╨/═ DESIGNED TO RUN ON THE ╔┬═-╨├ INSTEAD OF ╨├-─╧╙. ╨├-─╧╙ AND ├╨/═-86
ARE NOT COMPATIBLE.) ├╥╧╙╙ ╠╔╬╦ IS SIMPLE TO USE, JUST FOLLOW THE PROMPTS ON
THE SCREEN. ╧NE WORD OF CAUTION, HOWEVER. ┬ECAUSE THE 1571 IS NOT A TRUE
╨├-─╧╙ DISK DRIVE, NEVER WRITE ╨├-─╧╙ FILES TO AN ORIGINAL, IRREPLACEABLE
DISK. ╨LAY IT SAFE, ALWAYS USE SCRATCH DISKS FOR WRITING FILES. (┴LTHOUGH
╔ HAVE HAD NO PROBLEMS WITH DISKS FROM THREE DIFFERENT ╔┬═-╨├S AND TWO ╨├
COMPATIBLES, THE POSSIBILITY DOES EXIST FOR MIS-MATCHED SECTOR TIMING, ETC.
╘HIS COULD HOPELESSLY CORRUPT THE DISK BEING WRITTEN TO.)
├╥╧╙╙ ╠╔╬╦ USES BURST MODE ON THE 1571 TO READ AND WRITE ╨├-─╧╙ AND ├╨/═
FILES, CONSEQUENTLY IT IS QUITE FAST. (┴ DETAILED DESCRIPTION OF 1571
BURST MODE AND HOW TO USE IT IS PRESENTED IN A SERIES OF ARTICLES BY
THIS AUTHOR IN ╘╨╒╟ MAGAZINE, STARTING IN ═AY 1986.) ┴ TYPICAL CONVERSION
OF A 16K (65 ╙┼╤ BLOCK) TEXT FILE FROM ╙┼╤ ╨┼╘╙├╔╔ TO ╨├-─╧╙ TAKES ABOUT
65 SECONDS, INCLUDING ABOUT 25 SECONDS OF "OVERHEAD" REQUIRED TO
DECODE AND RECODE THE ╨├-─╧╙ DIRECTORY AND FILE ALLOCATION TABLE (╞┴╘).
╬OTICE THAT ╔ SPECIFY THE CONVERSION OF A TEXT FILE. ╘HIS BRINGS UP A
GENERAL CAVEAT: PROGRAM FILES WRITTEN TO RUN UNDER ╨├-─╧╙ (I.E. WITH A FILE
TYPE OF .┼╪┼ OR .├╧═) WILL NOT WORK IN ├-128 MODE OR ├╨/═ MODE (THE ├╨/═
EXECUTABLE FILE ALSO HAS A FILE TYPE OF .├╧═, BUT THE TWO ARE NOT
INTERCHANGEABLE) OR VICE VERSA. ╚OWEVER, IF YOU DOWNLOAD A ├╨/═ PROGRAM TO
A ╨├-─╧╙ DISK AND THEN CONVERT THE FILE TO ├╨/═ FORMAT, THE PROGRAM WILL
WORK IN ├╨/═ MODE ON THE ├-128. ╘HIS IS USEFUL, FOR EXAMPLE, IF YOU DO NOT
HAVE A MODEM ON YOUR ├-128 BUT HAVE ACCESS TO ONE ON AN ╔┬═-╨├ WHERE YOU
WORK. ╘HE SAME GOES FOR DOWNLOADING TO A ├-128 PROGRAM TO ╨├-─╧╙ THEN
CONVERTING TO A ╨╥╟ ┴╙├╔╔ FILE OR DOWNLOADING TO ╙┼╤ FORMAT IN ├-128
MODE AND THEN CONVERTING TO ├╨/═ FORMAT. (╘HE ORIGINAL ├╨/═ SYSTEM FILES
FOR THE ├-128 DID NOT SUPPORT A MODEM. ╘HE UPGRADED VERSION NOW DOES.)
╘EXT AND DATA FILES, ON THE OTHER HAND, FROM ONE MACHINE CAN USUALLY BE
USED WITHOUT TROUBLE ON THE OTHER. ╘EXT FILES TRANSFERRED USING SCREEN
CODE ╨╥╟ FILES MAY REQUIRE REFORMATTING ON THE TARGET WORD PROCESSOR.
╙CREEN CODE FILES WRITTEN BY ├╥╧╙╙ ╠╔╬╦ MAY NOT WORK WITH ALL ├-128
WORD PROCESSORS. ╙OME WP'S, SUCH AS ╨APERBACK ╫RITER 128, INCLUDE A
HEADER BLOCK AT THE BEGINNING OF THE FILE. ╘HE HEADER CONTAINS INFO
ON THE FILE CHARACTERISTICS SUCH AS MARGINS ETC. ╔F IT IS NOT PRESENT,
THE WP MAY NOT BE ABLE TO READ THE FILE CORRECTLY. ╘HESE WP'S CAN
USUALLY READ ╙┼╤ FILES AS WELL, HOWEVER, SO IT IS BETTER TO WRITE
A ╙┼╤ FILE WITH ├╥╧╙╙ ╠╔╬╦ FOR USE ON MOST WP'S. ├╥╧╙╙ ╠╔╬╦ CAN
READ ╨╥╟ TEXT FILES WITH HEADERS, BUT YOU MUST DELETE THE HEADER BLOCK
WITH THE TARGET WP. ┬┴╙╔├ PROGRAM LISTINGS CREATED ON ONE MACHINE
CAN OFTEN BE USED ON ANOTHER WITH ONLY MINOR EDITING. ├-128 ┬┴╙╔├ 7.0,
├╨/═ ═┬┴╙╔├ AND ╔┬═-╨├ ┬┴╙╔├, AS WELL AS MOST OTHER TYPES OF ┬┴╙╔├, ARE
ALL VERSIONS OF ═ICROSOFT ┬┴╙╔├, THUS THE COMMANDS AND SYNTAX ARE VERY
SIMILAR. ╘O TRANSFER THE LISTINGS FROM ONE MACHINE TO ANOTHER, THE
PROGRAM MUST BE FIRST SAVED AS AN ┴╙├╔╔ TEXT FILE ON THE ORIGINAL MACHINE.
(╘HE TOKENIZED PROGRAMS FOR THE VARIOUS ┬┴╙╔├S ARE NOT COMPATIBLE IN
BOTH FORMAT AND KEYWORD TOKENS.) ╔N ╔┬═ AND ├╨/═ ┬┴╙╔├, THIS IS DONE
BY APPENDING AN ",┴" TO THE END OF THE ╙┴╓┼ STATEMENT:
╙┴╓┼ "FILENAME",┴
╔N ├-128 ┬┴╙╔├ 7.0, IT IS DONE USING THE FOLLOWING SEQUENCE OF STEPS
IN DIRECT MODE:
╧╨┼╬ 8,8,8,"0:FILENAME,S,W"
├═─8:╠╔╙╘
╨╥╔╬╘#8:├╠╧╙┼8
╘HIS FILE SHOULD BE READ IN BY ├╥╧╙╙ ╠╔╬╦ AS A ╙┼╤-╨┼╘╙├╔╔ FILE.
╬ON STANDARD CHARACTER CODES EMBEDDED IN PROGRAM TEXT (SUCH AS COLOR
CODES, REVERSE VIDEO AND CURSOR CONTROLS) SHOULD BE EDITED OUT, EITHER
BEFORE OR AFTER CONVERSION, BECAUSE THEY MAY CAUSE ╔┬═ AND ├╨/═ ┬┴╙╔├
TO BEHAVE IN ODD MANNERS. ╘O LOAD AN ┴╙├╔╔ FILE WITH ╔┬═ OR ├╨/═ ┬┴╙╔├,
THE NORMAL ╠╧┴─"FILENAME" COMMAND IS USED. ┴ ╙┼╤ TEXT FILE CAN ALSO
BE LOADED AS A PROGRAM ON THE ├-128. ╘HIS IS DONE IN THE FOLLOWING
MANNER (MANY THANKS TO COLLEAGUE ╩IM ┬UTTERFIELD FOR DEMONSTRATING
THIS TRICK TO ME):
─╧╨┼╬ #1,"FILENAME"
╙┘╙ 65478,0,1
─├╠╧╙┼
(╔NCIDENTALLY, THIS IS NO MAGICAL ╥╧═ ROUTINE, BUT THE NORMAL ╦┼╥╬┴╠
├╚╦╔╬ FUNCTION AT HEX $╞╞├6 WHICH HAS BEEN ENHANCED ON THE 128.)
╘HE FILE TO BE READ IN SHOULD BE SAVED AS A ╙┼╤-┴╙├╔╔ FILE WITH ├╥╧╙╙
LINK. ╘HIS ROUTINE READS IN THE TEXT FILE LISTING AND CONVERTS IT TO A
PROGRAM, JUST AS IF YOU HAD ENTERED EACH LINE DIRECTLY FROM THE KEYBOARD.
┬ECAUSE OF THIS, IT WILL NOT ERASE THE PROGRAM CURRENTLY IN MEMORY. ╘HE
NEW PROGRAM WILL BE MERGED WITH ANY THAT IS CURRENTLY IN MEMORY. ╔T
CAN THEREFORE ALSO BE USED TO MERGE TWO OR MORE ├-128 PROGRAMS. ┘OU
MAY GET A "SYNTAX ERROR" OR "OUT OF DATA" MESSAGE AFTER THE PROGRAM
LISTING HAS BEEN READ IN. ╘HIS IS CAUSED BY ANY EXTRANEOUS TEXT WHICH
MAY BE INCLUDED AT THE END OF THE LISTING FILE. ╬ORMALLY, HOWEVER, IT
HAS NO EFFECT ON THE LOADING OF THE PROGRAM. ╘HE FORMAT OF THE ┬┴╙╔├
LISTING IS IMPORTANT FOR FILES TO BE USED WITH ╔┬═ OR ├╨/═ ┬┴╙╔├. ├-128
┬┴╙╔├ 7.0 DOES NOT REQUIRE SPACES BETWEEN KEYWORDS AND ARGUMENTS, WHILE
BOTH ╔┬═ AND ├╨/═ ┬┴╙╔├ DO. ╞OR EXAMPLE, THE STATEMENT:
10 ╞╧╥╔=1╘╧10
IS LEGITIMATE IN ┬┴╙╔├ 7.0. ╞OR ╔┬═ AND ├╨/═ ┬┴╙╔├ IT MUST BE CHANGED
TO:
10 ╞╧╥ ╔=1 ╘╧ 10
╔T IS ALSO IMPORTANT TO REMEMBER THAT THE NUMBER OF SIGNIFICANT CHARACTERS
IN ┬┴╙╔├ 7.0 VARIABLE NAMES IS LIMITED TO 2, WHILE BOTH ╔┬═ AND ├╨/═
┬┴╙╔├ HAVE NO SUCH RESTRICTION. ╓┴╥╔┴┬╠┼1 AND ╓┴╠╒┼2 ARE DISTINCT
VARIABLE NAMES IN ╔┬═ AND ├╨/═ ┬┴╙╔├, WHILE IN ┬┴╙╔├ 7.0, THEY ARE BOTH
EQUIVALENT TO "╓┴".
╘HE MACHINE LANGUAGE PORTION OF THE PROGRAM IS A FILE NAMED "╪╠.═╠3" WHICH IS
AUTOMATICALLY LOADED BY THE MAIN PROGRAM. ╘HE ═╠ ROUTINE, WHICH IS LOCATED
IN THE CASSETTE AND ╥╙ 232 BUFFERS, CONTAINS SEVERAL ENTRY POINTS. ╘HESE
ARE:
HEX DEC FUNCTION
0B69 2921 BURST SECTOR READ (FOR ├╨/═ AND ╨├-─╧╙)
0B9C 2972 READ ╙┼╤ OR ╨╥╟ FILE, NO CONVERT
0BD0 3024 WRITE ╙┼╤, ╨╥╟ FILE OR PRINTER, NO CONVERT
0C02 3074 BURST SECTOR WRITE (FOR ├╨/═ AND ╨├-─╧╙)
0C45 3141 WRITE ╙┼╤ OR PRINTER , CONVERT ┴╙├╔╔ TO ╨┼╘╙├╔╔
0CE0 3296 READ ╙┼╤ FILE, CONVERT ╨┼╘╙├╔╔ TO ┴╙├╔╔
0D7D 3453 READ ╨╥╟ FILE, CONVERT SCREEN CODE TO ┴╙├╔╔
0DDF 3551 WRITE ╨╥╟ FILE, CONVERT ┴╙├╔╔ TO SCREEN
╔F YOU ARE INTERESTED, YOU CAN DISASSEMBLE THE MACHINE LANGUAGE WITH
THE ├-128'S BUILT IN MONITOR.
┴S YOU CAN SEE, THERE ARE NO ╥┼═ STATEMENTS IN THE MAIN ┬┴╙╔├ PROGRAM.
┬ESIDE THE FACT THAT ╔ DON'T LIKE ╥┼═S (THEY CLUTTER UP THE
LISTING AND SERVE NO REAL PURPOSE ANYWAY), THEY ALSO TAKE UP A CONSIDERABLE
AMOUNT OF ╥┴═. ╔N TRYING TO MAXIMIZE THE BUFFER SPACE, ╔ CHOSE TO LEAVE
THEM OUT. ╞OR THE BENEFIT OF THOSE WHO ARE INTERESTED THE FOLLOWING
TABLE SUMMARIZES ITS MAIN PARTS.
LINE FUNCTION
10-80 OPENING DISPLAY, DEFAULT PARAMETERS, ETC.
90-120 CALCULATE ├╨/═ SECTOR FILLING TABLE
130-150 ─┬=START OF DIRECTORY BUFFER,
╘┬=START OF DATA BUFFER IN BANK 0 ╥┴═
─╓() AND ╘┘$() ARE THE SUPPORTED DEVICES
AND FILE TYPES.
160 MAIN MENU SELECT
170-200 READ ╙┼╤ OR ╨╥╟ FILE
210-240 WRITE ╙┼╤ OR ╨╥╟ FILE OR PRINTER
250-300 READ ├╨/═ FILE
310-380 WRITE ├╨/═ FILE
390 READ ╙┼╤ OR ╨╥╟ DIRECTORY
400-420 READ ├╨/═ DIRECTORY
430 WAIT TILL NEXT KEY PRESS
440-450 READ A SPECIFIC ├╨/═ SECTOR
460-470 WRITE A SPECIFIC ├╨/═ SECTOR
480-540 ANALYZE ├╨/═ DIRECTORY AND ╞┴╘
550-560 EXIT AND ERROR ROUTINES
570 LOG IN CURRENT DISK
580-600 READ ╨├-─╧╙ DIRECTORY
610 READ A SPECIFIC ╨├-─╧╙ SECTOR
620-650 ANALYZE ╨├-─╧╙ ╞┴╘ AND DIRECTORY
660-720 READ ╨├-─╧╙ FILE
730-770 WRITE ╨├-─╧╙ FILE
780-820 RECODE AND WRITE ╨├-─╧╙ DIRECTORY AND ╞┴╘
830 WRITE A SPECIFIC ╨├-─╧╙ SECTOR
840 FIND FREE SPACE ON ╨├-─╧╙ DISK
850-860 NORMALIZE ╨├ ─╧╙ AND ├╨/═ FILENAMES
870 DISPLAY FILE STATS
880- ENTER MENU OPTIONS
╘HE MAXIMUM FILE SIZE THAT CAN BE TRANSFERRED IN ANY DIRECTIONS IS 45.5
K BYTES. ╠ONGER FILES WILL BE TRUNCATED TO THIS LENGTH. ╘HIS IS
EQUIVALENT TO 183 ╙┼╤ BLOCKS OR NEARLY 3 FULL ├╨/═ DIRECTORY EXTENTS.
┴LL FILES IN MEMORY ARE ASSUMED TO BE IN ┴╙├╔╔ FORMAT. ╙┼╤ FILES READ
WITH THE CONVERSION OPTION ARE ASSUMED TO BE ╨┼╘╙├╔╔ ON THE DISK AND
ARE TRANSLATED TO ┴╙├╔╔ AS THEY ARE READ IN. ╙┼╤ FILES WRITTEN
WITH THE CONVERSION OPTION ARE ASSUMED TO BE ┴╙├╔╔ IN MEMORY AND ARE
CONVERTED TO ╨┼╘╙├╔╔ AS THEY ARE WRITTEN TO DISK. ╙IMILARLY, CONVERSIONS
ARE MADE WHEN READING FROM OR WRITING TO ╨╥╟ SCREEN CODE FILES. ┴LL
OTHER TRANSFERS ARE DONE IN A BINARY WHAT-YOU-SEE-IS-WHAT-YOU-GET FASHION.
├╥╧╙╙ ╠╔╬╦ CAN BE USED FOR SIMPLE ┴╙├╔╔ <> ╨┼╘╙├╔╔ CONVERSION OF ╙┼╤
FILES WITH EITHER A 1571 OR 1541 (OR OTHER COMPATIBLE ) DRIVE IN THE
FOLLOWING MANNER:
╨┼╘╙├╔╔ TO ┴╙├╔╔ - READ THE FILE IN ╨┼╘╙├╔╔ <> ┴╙├╔╔ CONVERSION
MODE, THEN WRITE IT IN BINARY MODE.
┴╙├╔╔ TO ╨┼╘╙├╔╔ - READ THE FILE IN BINARY MODE, THEN WRITE IT IN
╨┼╘╙├╔╔ <> ┴╙├╔╔ CONVERSION MODE.
╧NE WORD OF CAUTION FOR ╨┼╘╙├╔╔ <> ┴╙├╔╔ CONVERSIONS. ├╥╧╙╙ ╠╔╬╦ PASSES
CONTROL CODES (┴╙├╔╔ VALUE LESS THAN 32) AND CERTAIN OTHER SPECIAL
CODES THROUGH IN BOTH DIRECTIONS UNCHANGED. ╔T ALSO ADDS A LINEFEED
CHARACTER (┴╙├╔╔ ├╚╥$(10)) AFTER EACH CARRIAGE RETURN WHEN CONVERTING
TO ┴╙├╔╔ AND REMOVES ALL LINEFEEDS WHEN CONVERTING TO ╨┼╘╙├╔╔. ╘HE
PRESENCE OF THESE CODES IN, FOR EXAMPLE, TEXT FORMATTED ON A ├╨/═
WORD PROCESSOR MAY REQUIRE THE TEXT TO BE REFORMATTED WITH A ├-128
WORD PROCESSOR BEFORE IT CAN BE USED IN ├-128 MODE. ╔N ADDITION,
DOCUMENTS ORIGINALLY WRITTEN OR EDITED WITH SOME WORD PROCESSORS
(SUCH AS ╫ORD╙TAR- EITHER ├╨/═ OR ╨├-─╧╙ VERSION) SHOULD BE HANDLED
IN NON-DOCUMENT MODE (I.E. STANDARD ┴╙├╔╔) ON THESE WORD PROCESSORS
IF THEY ARE INTENDED TO BE SUBSEQUENTLY USED IN ├-128 MODE. ╫ORD╙TAR
SETS THE HIGH BITS IN THE LAST CHARACTER OF EACH WORD IN DOCUMENT
MODE. ╘HIS RESULTS IN AN INCORRECT ┴╙├╔╔ TO ╨┼╘╙├╔╔ CONVERSION. ╘HE HIGH
BIT CAN ALSO BE STRIPPED OUT USING THE ┌ OPTION (ZERO THE PARITY BIT) OF
├╨/═'S ╨╔╨ COMMAND TO COPY THE ORIGINAL FILE TO AN ┴╙├╔╔ COMPATIBLE FILE.
┴ SIMILAR ROUTINE CAN BE USED FOR CONVERTING BETWEEN ╙┼╤ AND ╨╥╟ TEXT
FILES.
╫HEN READING THE ╨├-─╧╙ DIRECTORY, ├╥╧╙╙ ╠╔╬╦ IGNORES THE FILE ATTRIBUTE
(BYTE 11) EXCEPT FOR THE VOLUME LABEL AND SUBDIRECTORY ATTRIBUTES WHICH
DO NOT REPRESENT VALID FILES. ╘HUS YOU CAN DISPLAY AND ACCESS HIDDEN AND
SYSTEM FILES WHICH DO NOT SHOW UP ON AN ╔┬═-╨├ ─╔╥ COMMAND. ├╥╧╙╙ ╠╔╬╦
SETS DIRECTORY BYTES 11-25 AND 30-31 TO 0 WHEN IT IS WRITING A NEW FILE.
╘HIS IS EASIER THAN TRYING TO CALCULATE A FILE CREATION TIME, DATE, ATTRIBUTE,
ETC. ┌ERO BYTES IN THESE LOCATIONS ARE ACCEPTED BY ╨├-─╧╙. ╞OR A MORE
DETAILED DESCRIPTION OF ╨├-─╧╙ FILE FORMATS, SEE ╨ART ╔ OF THIS ARTICLE.
├╥╧╙╙ ╠╔╬╦ WILL RECOVER UNUSED AND SCRATCHED DIRECTORY AND DATA SPACE FOR BOTH
├╨/═ AND ╨├-─╧╙ DISKS. ╘HIS IS HANDLED AUTOMATICALLY BY ├OMMODORE ─╧╙ WHEN
WRITING TO ╙┼╤ OR ╨╥╟ FILES. ├╥╧╙╙ ╠╔╬╦ IS CURRENTLY CONFIGURED TO WORK WITH
UP TO TWO DRIVES AND A PRINTER. ╞OR ├╨/═ AND ╨├-─╧╙ FILES, AT LEAST ONE
OF THE DRIVES MUST BE A 1571. ╘HE DEVICE CONFIGURATION CAN BE CHANGED
BY ALTERING THE DEFINITIONS OF ARRAYS ─╓() AND ─╓$() IN LINE 130-150.
╘O USE THE PRINTER FOR A FILE DUMP, SELECT ╙┼╤ ┴╙├╔╔ (FOR AN ┴╙├╔╔ PRINTER)
OR ╙┼╤ ╨┼╘╙├╔╔ AS THE TARGET FILE TYPE WITH THE "╙┼╘ ╘┴╥╟┼╘" OPTION
ON THE MAIN MENU. (╘HERE IS NO NEED TO SPECIFY A FILENAME FOR THE
PRINTER. ┴ <RETURN> AT THE FILENAME PROMPT IS SUFFICIENT.) ┘OU CAN THEN
SELECT THE PRINTER AS THE TARGET DEVICE. ╧F COURSE, THE 1541 OR
COMPATIBLE CAN ONLY BE USED TO READ OR WRITE ╙┼╤ OR ╨╥╟ FILES, SINCE IT DOES
NOT SUPPORT BURST MODE.
┴LTHOUGH IT IS NOT AN ╔┬═-╨├ EMULATOR, YOU WILL FIND ├╥╧╙╙ ╠╔╬╦ AN INVALUABLE
UTILITY FOR TRANSFERRING FILES FROM ONE MACHINE TO ANOTHER (AND BETWEEN
MODES ON THE ├-128 ALSO) IF YOU USE BOTH AN ╔┬═-╨├ AND A ├-128. ╔T IS ALSO
POSSIBLE WITH A LITTLE DETAILED KNOWLEDGE OF THE DISK FORMATS TO USE THE
SAME PRINCIPLES FOR TRANSFERRING FILES TO/FROM OTHER COMPUTERS AND
OPERATING SYSTEMS THAT USE ═╞═ TYPE DISKS, SUCH AS ╘╥╙─╧╙ USED ON THE
╥ADIO ╙HACK COMPUTERS OR POSSIBLY ╥╙ ├O├O ╧╙/9 DISKS TO ╨┼╘ ╧╙/9 FORMAT.
M.G. T